Electronic Cymbal Lemon 15" Triple Zone Ride Cymbal

Description

This listing is for one Lemon 15" triple zone ride cymbal. There are 2 available. These electronic cymbals work excellent.  Now, depending on what drum module you have, when you hit the bell area, you may get the edge sound.  When you hit the edge, you may get the bell sound.  To fix that, you can either go into your drum module & change the sounds that way or you can take apart the bottom of the cymbal.  You can do that by taking out all of the screws then taking the piece off the bottom of the cymbal.  Then, next to the plug on the left you can unplug the red & black wires that are going into a small white plug. Then you can plug them into the spot next to the plug on the right.  Then when its plugged into your module, the bell & edge sounds will be in the right places.  If you have to do that, it wont work right if you want to use it as a crash cymbal.  It will only work as a single zone crash if it is wired that way.  If you buy this to use as a crash cymbal, you shouldn't have to do anything with it.  Just plug into the ride 1 spot & you should be good to go & it will work as a dual zone crash. As a ride or a crash cymbal, it also has an area that can be choked. If you already have one of the Roland cymbal stoppers, around the hole in the center is designed to work with those. I have an Alesis Strike module.  These work excellent with that.  The bell & edge sound were switched around.  So to use this as a ride cymbal with an Alesis Strike module, the sounds would either have to be switched in the module or the wires in the cymbal would have to be moved over to the other plug. If you have any other questions about the cymbal, just message me.
Thanks, Dan